From 1ea087b75cb77562431a3263969a6912bf3af193 Mon Sep 17 00:00:00 2001 From: someuser Date: Thu, 12 May 2022 15:51:46 +0300 Subject: [PATCH] LIN_ADVANCE --- Marlin/Configuration.h | 2 +- Marlin/Configuration_adv.h | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 62034e2..3751f07 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1027,7 +1027,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -#define S_CURVE_ACCELERATION +//#define S_CURVE_ACCELERATION //Говорят качество улучшается и разгоны плавнее. //=========================================================================== diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 6a49d4f..a5fb4c4 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1993,7 +1993,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -// #define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -3960,12 +3960,12 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PAUSE_M76 - //#define HOST_PROMPT_SUPPORT + #define HOST_PAUSE_M76 + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start - //#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down + #define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down #endif /**