From 5fbd77dec7bbcf515fe9b4a6f607872203fc9fbc Mon Sep 17 00:00:00 2001 From: someuser Date: Sun, 17 Apr 2022 12:08:39 +0300 Subject: [PATCH] DEFAULT CR-10 CONFIG --- Marlin/Configuration.h | 92 +++++++++++++++++++------------------- Marlin/Configuration_adv.h | 64 +++++++++++++------------- Marlin/_Bootscreen.h | 58 ++++++++++++++++++++++++ Marlin/_Statusscreen.h | 68 ++++++++++++++++++++++++++++ platformio.ini | 2 +- 5 files changed, 207 insertions(+), 77 deletions(-) create mode 100644 Marlin/_Bootscreen.h create mode 100644 Marlin/_Statusscreen.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f0fc4dd..cc7778a 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Creality CR-10)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -96,7 +98,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif /** @@ -120,7 +122,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 //#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate /** @@ -143,7 +145,7 @@ //#define BLUETOOTH // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -494,7 +496,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -563,7 +565,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -593,16 +595,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Stock CR-10 tuned for 70C #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify up to one value per hotend here, according to your setup. // If there are fewer values, the last one applies to the remaining hotends. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.57, 22.57 } + #define DEFAULT_Ki_LIST { 1.72, 1.72 } + #define DEFAULT_Kd_LIST { 73.96, 73.96 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 #endif #endif // PIDTEMP @@ -623,7 +626,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -639,11 +642,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Stock CR-10 Bed Tuned for 70C + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,7 +719,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -791,7 +793,7 @@ //#define USE_KMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMIN @@ -927,14 +929,14 @@ * Override with M92 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -947,7 +949,7 @@ * Override with M201 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -962,9 +964,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -978,7 +980,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 2.7 //#define DEFAULT_IJERK 0.3 //#define DEFAULT_JJERK 0.3 //#define DEFAULT_KJERK 0.3 @@ -1001,7 +1003,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1257,9 +1259,9 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1330,7 +1332,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false //#define INVERT_I_DIR false @@ -1340,7 +1342,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1378,16 +1380,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE +#define X_MAX_POS X_BED_SIZE + 20 #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 //#define I_MIN_POS 0 //#define I_MAX_POS 50 //#define J_MIN_POS 0 @@ -1685,7 +1687,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1754,7 +1756,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1831,7 +1833,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1866,7 +1868,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1888,7 +1890,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -2105,7 +2107,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2184,7 +2186,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2472,7 +2474,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 7f5db89..d5a0529 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1" + /** * Configuration_adv.h * @@ -846,7 +848,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -897,7 +899,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -974,7 +976,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1366,7 +1368,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1443,7 +1445,7 @@ //#define MEDIA_MENU_AT_TOP // Force the media menu to be listed on the top of the main menu - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1503,16 +1505,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1942,7 +1944,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1950,10 +1952,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2145,7 +2147,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Requires ~3226 bytes +//#define ARC_SUPPORT // Requires ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MIN_ARC_SEGMENT_MM 0.1 // (mm) Minimum length of each arc segment #define MAX_ARC_SEGMENT_MM 1.0 // (mm) Maximum length of each arc segment @@ -2482,21 +2484,21 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. @@ -2516,14 +2518,14 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. //#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again. //#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -2684,7 +2686,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2704,7 +2706,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2724,7 +2726,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2794,7 +2796,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2975,9 +2977,6 @@ //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z - //#define CHOPPER_TIMING_I CHOPPER_TIMING - //#define CHOPPER_TIMING_J CHOPPER_TIMING - //#define CHOPPER_TIMING_K CHOPPER_TIMING //#define CHOPPER_TIMING_E CHOPPER_TIMING // For Extruders (override below) //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E @@ -3657,11 +3656,14 @@ */ //#define FILAMENT_WIDTH_SENSOR +#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament +//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament + #if ENABLED(FILAMENT_WIDTH_SENSOR) #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define FILWIDTH_ERROR_MARGIN (DEFAULT_STDDEV_FILAMENT_DIA*4) // (mm) If a measurement differs too much from nominal width ignore it #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially @@ -3776,7 +3778,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/Marlin/_Bootscreen.h b/Marlin/_Bootscreen.h new file mode 100644 index 0000000..e41d463 --- /dev/null +++ b/Marlin/_Bootscreen.h @@ -0,0 +1,58 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1" + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * https://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/_Statusscreen.h b/Marlin/_Statusscreen.h new file mode 100644 index 0000000..f5a653a --- /dev/null +++ b/Marlin/_Statusscreen.h @@ -0,0 +1,68 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1" + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * https://marlinfw.org/tools/u8glib/converter.html + */ + +// +// Status Screen Logo bitmap +// +#define STATUS_LOGO_X 8 +#define STATUS_LOGO_Y 5 +#define STATUS_LOGO_WIDTH 22 + +const unsigned char status_logo_bmp[] PROGMEM = { + B00111110,B00001111,B11110000, + B11000001,B10000110,B00011000, + B11000001,B10000110,B00001100, + B00000001,B10000110,B00000100, + B00000011,B00000110,B00000100, + B00011111,B00000110,B00000100, + B00000011,B00000110,B00000100, + B00000001,B10000110,B00000100, + B11000001,B10000110,B00001100, + B11000001,B10000110,B00011000, + B00111110,B00001111,B11110000 +}; + +// +// Use default bitmaps +// +#define STATUS_HOTEND_ANIM +#define STATUS_BED_ANIM +#if HOTENDS < 2 + #define STATUS_HEATERS_X 40 + #define STATUS_BED_X 72 +#else + #define STATUS_HEATERS_X 32 + #define STATUS_BED_X 80 +#endif diff --git a/platformio.ini b/platformio.ini index e1db73a..cca156c 100644 --- a/platformio.ini +++ b/platformio.ini @@ -13,7 +13,7 @@ [platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards -default_envs = mega2560 +default_envs = LPC1769 include_dir = Marlin extra_configs = ini/avr.ini