Monster Printer configuration

Marlin/Configuration_adv.h

@@ -1282,17 +1282,17 @@
 
   // Add Probe Z Offset calibration to the Z Probe Offsets menu
   #if HAS_BED_PROBE
-    //#define PROBE_OFFSET_WIZARD
+    #define PROBE_OFFSET_WIZARD
     #if ENABLED(PROBE_OFFSET_WIZARD)
       //
       // Enable to init the Probe Z-Offset when starting the Wizard.
       // Use a height slightly above the estimated nozzle-to-probe Z offset.
       // For example, with an offset of -5, consider a starting height of -4.
       //
-      //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+      #define PROBE_OFFSET_WIZARD_START_Z -4.0
 
       // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
-      //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
+      #define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
     #endif
 
     #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
@@ -1528,7 +1528,7 @@
   //#define LONG_FILENAME_HOST_SUPPORT
 
   // Enable this option to scroll long filenames in the SD card menu
-  //#define SCROLL_LONG_FILENAMES
+  #define SCROLL_LONG_FILENAMES
 
   // Leave the heaters on after Stop Print (not recommended!)
   //#define SD_ABORT_NO_COOLDOWN
@@ -1629,6 +1629,8 @@
    * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
    */
   //#define SDCARD_CONNECTION LCD
+  //Для CR-10 выставляем слот SD на плате
+  #define SDCARD_CONNECTION ONBOARD
 
   // Enable if SD detect is rendered useless (e.g., by using an SD extender)
   //#define NO_SD_DETECT
@@ -1991,7 +1993,7 @@
  *
  * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
  */
-//#define LIN_ADVANCE
+// #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
   #define LIN_ADVANCE_K 0.22    // Unit: mm compression per 1mm/s extruder speed
@@ -2686,7 +2688,8 @@
   #define INTERPOLATE      true
 
   #if AXIS_IS_TMC(X)
-    #define X_CURRENT       650        // (mA) RMS current. Multiply by 1.414 for peak current.
+    //more current
+    #define X_CURRENT       720        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
     #define X_MICROSTEPS     16        // 0..256
     #define X_RSENSE          0.11
@@ -2706,7 +2709,7 @@
   #endif
 
   #if AXIS_IS_TMC(Y)
-    #define Y_CURRENT       650
+    #define Y_CURRENT       720
     #define Y_CURRENT_HOME  Y_CURRENT
     #define Y_MICROSTEPS     16
     #define Y_RSENSE          0.11
@@ -2726,7 +2729,7 @@
   #endif
 
   #if AXIS_IS_TMC(Z)
-    #define Z_CURRENT       580
+    #define Z_CURRENT       680
     #define Z_CURRENT_HOME  Z_CURRENT
     #define Z_MICROSTEPS     16
     #define Z_RSENSE          0.11
@@ -2796,7 +2799,7 @@
   #endif
 
   #if AXIS_IS_TMC(E0)
-    #define E0_CURRENT      650
+    #define E0_CURRENT      750
     #define E0_MICROSTEPS    16
     #define E0_RSENSE         0.11
     #define E0_CHAIN_POS     -1