monster/CR10-SKR-Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Monster Printer configuration

Browse Source
This commit is contained in:
someuser
2022-04-17 12:11:43 +03:00
parent 5fbd77dec7
commit a6ad1f8788
4 changed files with 413 additions and 45 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.vscode/extensions.json
Vendored
+3
View File
@@ -4,5 +4,8 @@
"recommendations": [
"marlinfirmware.auto-build",
"platformio.platformio-ide"
],
"unwantedRecommendations": [
"ms-vscode.cpptools-extension-pack"
]
}
Custom_configuration_params_v1.diff
+349
View File
@@ -0,0 +1,349 @@
diff --git a/.vscode/extensions.json b/.vscode/extensions.json
index 7226831..f495d14 100644
--- a/.vscode/extensions.json
+++ b/.vscode/extensions.json
@@ -4,5 +4,8 @@
"recommendations": [
"marlinfirmware.auto-build",
"platformio.platformio-ide"
+ ],
+ "unwantedRecommendations": [
+ "ms-vscode.cpptools-extension-pack"
]
}
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index cc7778a..b42b685 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -21,7 +21,7 @@
*/
#pragma once
-#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1"
+//#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1"
/**
* Configuration.h
@@ -86,10 +86,10 @@
*/
// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
-#define SHOW_BOOTSCREEN
+//#define SHOW_BOOTSCREEN
// Show the bitmap in Marlin/_Bootscreen.h on startup.
-#define SHOW_CUSTOM_BOOTSCREEN
+//#define SHOW_CUSTOM_BOOTSCREEN
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
//#define CUSTOM_STATUS_SCREEN_IMAGE
@@ -98,7 +98,7 @@
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
- #define MOTHERBOARD BOARD_MELZI_CREALITY
+ #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
#endif
/**
@@ -109,7 +109,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-#define SERIAL_PORT 0
+#define SERIAL_PORT -1
/**
* Serial Port Baud Rate
@@ -130,8 +130,8 @@
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-//#define SERIAL_PORT_2 -1
-//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
+#define SERIAL_PORT_2 0
+#define BAUDRATE_2 115200 // Enable to override BAUDRATE
/**
* Select a third serial port on the board to use for communication with the host.
@@ -557,14 +557,14 @@
// Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 275
-#define HEATER_1_MAXTEMP 275
-#define HEATER_2_MAXTEMP 275
-#define HEATER_3_MAXTEMP 275
-#define HEATER_4_MAXTEMP 275
-#define HEATER_5_MAXTEMP 275
-#define HEATER_6_MAXTEMP 275
-#define HEATER_7_MAXTEMP 275
+#define HEATER_0_MAXTEMP 290
+#define HEATER_1_MAXTEMP 290
+#define HEATER_2_MAXTEMP 290
+#define HEATER_3_MAXTEMP 290
+#define HEATER_4_MAXTEMP 290
+#define HEATER_5_MAXTEMP 290
+#define HEATER_6_MAXTEMP 290
+#define HEATER_7_MAXTEMP 290
#define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 60
@@ -603,9 +603,14 @@
#define DEFAULT_Ki_LIST { 1.72, 1.72 }
#define DEFAULT_Kd_LIST { 73.96, 73.96 }
#else
- #define DEFAULT_Kp 22.57
- #define DEFAULT_Ki 1.72
- #define DEFAULT_Kd 73.96
+ // #define DEFAULT_Kp 22.57
+ // #define DEFAULT_Ki 1.72
+ // #define DEFAULT_Kd 73.96
+
+ //autotune for cr-10
+ #define DEFAULT_Kp 16.84
+ #define DEFAULT_Ki 1.04
+ #define DEFAULT_Kd 67.97
#endif
#endif // PIDTEMP
@@ -863,9 +868,13 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/
-#define X_DRIVER_TYPE A4988
-#define Y_DRIVER_TYPE A4988
-#define Z_DRIVER_TYPE A4988
+
+#define X_DRIVER_TYPE TMC2209
+#define Y_DRIVER_TYPE TMC2209
+#define Z_DRIVER_TYPE TMC2209
+// #define X_DRIVER_TYPE A4988
+// #define Y_DRIVER_TYPE A4988
+// #define Z_DRIVER_TYPE A4988
//#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988
@@ -874,7 +883,8 @@
//#define I_DRIVER_TYPE A4988
//#define J_DRIVER_TYPE A4988
//#define K_DRIVER_TYPE A4988
-#define E0_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE TMC2209
+// #define E0_DRIVER_TYPE A4988
//#define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988
@@ -929,7 +939,7 @@
* Override with M92
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/
-#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 }
/**
* Default Max Feed Rate (mm/s)
@@ -950,6 +960,7 @@
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 }
+// PREV: #define DEFAULT_MAX_ACCELERATION { 2500, 2500, 500, 5000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1016,7 +1027,8 @@
*
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION
+//Говорят качество улучшается и разгоны плавнее.
//===========================================================================
//============================= Z Probe Options =============================
@@ -1032,10 +1044,10 @@
* The probe replaces the Z-MIN endstop and is used for Z homing.
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
*/
-#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+// #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing
-//#define USE_PROBE_FOR_Z_HOMING
+#define USE_PROBE_FOR_Z_HOMING
/**
* Z_MIN_PROBE_PIN
@@ -1052,7 +1064,7 @@
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*/
-//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
+#define Z_MIN_PROBE_PIN P0_10 // Pin 32 is the RAMPS default
/**
* Probe Type
@@ -1089,7 +1101,7 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
-//#define BLTOUCH
+#define BLTOUCH
/**
* Touch-MI Probe by hotends.fr
@@ -1181,7 +1193,8 @@
* | [-] |
* O-- FRONT --+
*/
-#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 0 }
+// #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1258,8 +1271,8 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/
-#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
-#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points
+#define Z_CLEARANCE_DEPLOY_PROBE 5 //10 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_BETWEEN_PROBES 5 //10 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 10 // Z position after probing is done
@@ -1270,7 +1283,7 @@
#define Z_PROBE_OFFSET_RANGE_MAX 20
// Enable the M48 repeatability test to test probe accuracy
-//#define Z_MIN_PROBE_REPEATABILITY_TEST
+#define Z_MIN_PROBE_REPEATABILITY_TEST
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
@@ -1385,7 +1398,7 @@
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
-#define Y_MIN_POS 0
+#define Y_MIN_POS -10 //0
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE + 20
#define Y_MAX_POS Y_BED_SIZE
@@ -1547,7 +1560,7 @@
*/
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
-//#define AUTO_BED_LEVELING_BILINEAR
+#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
@@ -1678,7 +1691,7 @@
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
*/
-//#define LCD_BED_LEVELING
+#define LCD_BED_LEVELING
#if ENABLED(LCD_BED_LEVELING)
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
@@ -1748,7 +1761,7 @@
* - Allows Z homing only when XY positions are known and trusted.
* - If stepper drivers sleep, XY homing may be required again before Z homing.
*/
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index d5a0529..ccb5162 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1282,17 +1282,17 @@
// Add Probe Z Offset calibration to the Z Probe Offsets menu
#if HAS_BED_PROBE
- //#define PROBE_OFFSET_WIZARD
+ #define PROBE_OFFSET_WIZARD
#if ENABLED(PROBE_OFFSET_WIZARD)
//
// Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4.
//
- //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+ #define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
- //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
+ #define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
@@ -1528,7 +1528,7 @@
//#define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu
- //#define SCROLL_LONG_FILENAMES
+ #define SCROLL_LONG_FILENAMES
// Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN
@@ -1629,6 +1629,8 @@
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
+ //Для CR-10 выставляем слот SD на плате
+ #define SDCARD_CONNECTION ONBOARD
// Enable if SD detect is rendered useless (e.g., by using an SD extender)
//#define NO_SD_DETECT
@@ -1991,7 +1993,7 @@
*
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
-//#define LIN_ADVANCE
+// #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
@@ -2686,7 +2688,8 @@
#define INTERPOLATE true
#if AXIS_IS_TMC(X)
- #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
+ //more current
+ #define X_CURRENT 720 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11
@@ -2706,7 +2709,7 @@
#endif
#if AXIS_IS_TMC(Y)
- #define Y_CURRENT 650
+ #define Y_CURRENT 720
#define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 16
#define Y_RSENSE 0.11
@@ -2726,7 +2729,7 @@
#endif
#if AXIS_IS_TMC(Z)
- #define Z_CURRENT 580
+ #define Z_CURRENT 680
#define Z_CURRENT_HOME Z_CURRENT
#define Z_MICROSTEPS 16
#define Z_RSENSE 0.11
@@ -2796,7 +2799,7 @@
#endif
#if AXIS_IS_TMC(E0)
- #define E0_CURRENT 650
+ #define E0_CURRENT 750
#define E0_MICROSTEPS 16
#define E0_RSENSE 0.11
#define E0_CHAIN_POS -1
Marlin/Configuration.h
+49 -36
View File
@@ -21,7 +21,7 @@
*/
#pragma once
#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1"
//#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1"
/**
* Configuration.h
@@ -86,10 +86,10 @@
*/
// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
#define SHOW_BOOTSCREEN
//#define SHOW_BOOTSCREEN
// Show the bitmap in Marlin/_Bootscreen.h on startup.
#define SHOW_CUSTOM_BOOTSCREEN
//#define SHOW_CUSTOM_BOOTSCREEN
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
//#define CUSTOM_STATUS_SCREEN_IMAGE
@@ -98,7 +98,7 @@
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_MELZI_CREALITY
#define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
#endif
/**
@@ -109,7 +109,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT 0
#define SERIAL_PORT -1
/**
* Serial Port Baud Rate
@@ -130,8 +130,8 @@
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
//#define SERIAL_PORT_2 -1
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
#define SERIAL_PORT_2 0
#define BAUDRATE_2 115200 // Enable to override BAUDRATE
/**
* Select a third serial port on the board to use for communication with the host.
@@ -557,14 +557,14 @@
// Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.)
#define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275
#define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 275
#define HEATER_0_MAXTEMP 290
#define HEATER_1_MAXTEMP 290
#define HEATER_2_MAXTEMP 290
#define HEATER_3_MAXTEMP 290
#define HEATER_4_MAXTEMP 290
#define HEATER_5_MAXTEMP 290
#define HEATER_6_MAXTEMP 290
#define HEATER_7_MAXTEMP 290
#define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 60
@@ -603,9 +603,14 @@
#define DEFAULT_Ki_LIST { 1.72, 1.72 }
#define DEFAULT_Kd_LIST { 73.96, 73.96 }
#else
#define DEFAULT_Kp 22.57
#define DEFAULT_Ki 1.72
#define DEFAULT_Kd 73.96
// #define DEFAULT_Kp 22.57
// #define DEFAULT_Ki 1.72
// #define DEFAULT_Kd 73.96
//autotune for cr-10
#define DEFAULT_Kp 16.84
#define DEFAULT_Ki 1.04
#define DEFAULT_Kd 67.97
#endif
#endif // PIDTEMP
@@ -863,9 +868,13 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/
#define X_DRIVER_TYPE A4988
#define Y_DRIVER_TYPE A4988
#define Z_DRIVER_TYPE A4988
#define X_DRIVER_TYPE TMC2209
#define Y_DRIVER_TYPE TMC2209
#define Z_DRIVER_TYPE TMC2209
// #define X_DRIVER_TYPE A4988
// #define Y_DRIVER_TYPE A4988
// #define Z_DRIVER_TYPE A4988
//#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988
@@ -874,7 +883,8 @@
//#define I_DRIVER_TYPE A4988
//#define J_DRIVER_TYPE A4988
//#define K_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE TMC2209
// #define E0_DRIVER_TYPE A4988
//#define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988
@@ -929,7 +939,7 @@
* Override with M92
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 }
/**
* Default Max Feed Rate (mm/s)
@@ -950,6 +960,7 @@
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 }
// PREV: #define DEFAULT_MAX_ACCELERATION { 2500, 2500, 500, 5000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1016,7 +1027,8 @@
*
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/
//#define S_CURVE_ACCELERATION
#define S_CURVE_ACCELERATION
//Говорят качество улучшается и разгоны плавнее.
//===========================================================================
//============================= Z Probe Options =============================
@@ -1032,10 +1044,10 @@
* The probe replaces the Z-MIN endstop and is used for Z homing.
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
*/
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING
#define USE_PROBE_FOR_Z_HOMING
/**
* Z_MIN_PROBE_PIN
@@ -1052,7 +1064,7 @@
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*/
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
#define Z_MIN_PROBE_PIN P0_10 // Pin 32 is the RAMPS default
/**
* Probe Type
@@ -1089,7 +1101,7 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
#define BLTOUCH
/**
* Touch-MI Probe by hotends.fr
@@ -1181,7 +1193,8 @@
* | [-] |
* O-- FRONT --+
*/
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 0 }
// #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1258,8 +1271,8 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points
#define Z_CLEARANCE_DEPLOY_PROBE 5 //10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 //10 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 10 // Z position after probing is done
@@ -1270,7 +1283,7 @@
#define Z_PROBE_OFFSET_RANGE_MAX 20
// Enable the M48 repeatability test to test probe accuracy
//#define Z_MIN_PROBE_REPEATABILITY_TEST
#define Z_MIN_PROBE_REPEATABILITY_TEST
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
@@ -1385,7 +1398,7 @@
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
#define Y_MIN_POS 0
#define Y_MIN_POS -10 //0
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE + 20
#define Y_MAX_POS Y_BED_SIZE
@@ -1547,7 +1560,7 @@
*/
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR
#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
@@ -1678,7 +1691,7 @@
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
*/
//#define LCD_BED_LEVELING
#define LCD_BED_LEVELING
#if ENABLED(LCD_BED_LEVELING)
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
@@ -1748,7 +1761,7 @@
* - Allows Z homing only when XY positions are known and trusted.
* - If stepper drivers sleep, XY homing may be required again before Z homing.
*/
//#define Z_SAFE_HOMING
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
Marlin/Configuration_adv.h
+12 -9
View File
@@ -1282,17 +1282,17 @@
// Add Probe Z Offset calibration to the Z Probe Offsets menu
#if HAS_BED_PROBE
//#define PROBE_OFFSET_WIZARD
#define PROBE_OFFSET_WIZARD
#if ENABLED(PROBE_OFFSET_WIZARD)
//
// Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4.
//
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
@@ -1528,7 +1528,7 @@
//#define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES
#define SCROLL_LONG_FILENAMES
// Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN
@@ -1629,6 +1629,8 @@
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
//Для CR-10 выставляем слот SD на плате
#define SDCARD_CONNECTION ONBOARD
// Enable if SD detect is rendered useless (e.g., by using an SD extender)
//#define NO_SD_DETECT
@@ -1991,7 +1993,7 @@
*
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
//#define LIN_ADVANCE
// #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
@@ -2686,7 +2688,8 @@
#define INTERPOLATE true
#if AXIS_IS_TMC(X)
#define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
//more current
#define X_CURRENT 720 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11
@@ -2706,7 +2709,7 @@
#endif
#if AXIS_IS_TMC(Y)
#define Y_CURRENT 650
#define Y_CURRENT 720
#define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 16
#define Y_RSENSE 0.11
@@ -2726,7 +2729,7 @@
#endif
#if AXIS_IS_TMC(Z)
#define Z_CURRENT 580
#define Z_CURRENT 680
#define Z_CURRENT_HOME Z_CURRENT
#define Z_MICROSTEPS 16
#define Z_RSENSE 0.11
@@ -2796,7 +2799,7 @@
#endif
#if AXIS_IS_TMC(E0)
#define E0_CURRENT 650
#define E0_CURRENT 750
#define E0_MICROSTEPS 16
#define E0_RSENSE 0.11
#define E0_CHAIN_POS -1