updating configuration

esphome/settings/old/ac_childroom_gree.yaml

@@ -0,0 +1,85 @@
+#===============================================================================
+# Контроллер кондиционера в гостиной
+# Wemos D1 mini
+#===============================================================================
+substitutions:
+  node_name: ac_childroom # Use a unique name.
+  node_id: ac_childroom    # Use a unique id.
+  deviceid: ac_childroom
+  devicename: ac_childroom
+  friendly_node_name: "Кондиционер Детская Старый"
+
+#===============================================================================
+# Общий конфиг
+#===============================================================================
+esphome:
+  name: ${node_name}
+  friendly_name: ${friendly_node_name}
+
+esp8266:
+  board: esp12e
+
+web_server:
+  port: 80
+  auth:
+    username: admin
+    password: superLongP4ss
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  - platform: esphome
+    password: !secret api_encryption_key
+
+wifi:
+  ssid: !secret wifi_24_name
+  password: !secret wifi_24_pass
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${devicename} Fallback Hotspot"
+    password: !secret esphome_captive_pass
+
+captive_portal:
+
+# Enable logging
+logger:
+  baud_rate: 0 # disable LOG output on UART as UART is used for Sinclair AC unit
+#  level: VERBOSE
+
+uart:
+  tx_pin: 1
+  rx_pin: 3
+  baud_rate: 4800
+  parity: EVEN
+
+time:
+  - platform: sntp
+
+external_components:
+  - source: github://gekkehenkie11/esphome_gree_ac
+    components: [sinclair_ac]
+    refresh: 0s
+
+climate:
+  - platform: sinclair_ac
+    name: ${devicename}
+    horizontal_swing_select:
+      name: ${devicename} Horizontal Swing Mode
+    vertical_swing_select:
+      name: ${devicename} Vertical Swing Mode
+    display_select:
+      name: ${devicename} Display Mode
+    display_unit_select:
+      name: ${devicename} Display Unit
+    plasma_switch:
+      name: ${devicename} Plasma
+    sleep_switch:
+      name: ${devicename} Sleep
+    xfan_switch:
+      name: ${devicename} X-fan
+    save_switch:
+      name: ${devicename} Save/8 Heat  

esphome/settings/old/ac_childroom_midea.yaml

@@ -0,0 +1,69 @@
+esphome:
+  name: ac_childroom
+
+esp8266:
+  board: d1_mini
+
+# Disable logging over UART (required)
+logger:
+  baud_rate: 0
+
+# Enable Home Assistant API
+api:
+
+ota:
+  - platform: esphome
+    password: !secret api_encryption_key
+
+web_server:
+  port: 80
+
+wifi:
+  ssid: !secret wifi_24_name
+  password: !secret wifi_24_pass
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Childroom AC Fallback"
+    password: !secret esphome_captive_pass
+
+# UART settings for Midea dongle (required)
+uart:
+  tx_pin: GPIO1         # hardware dependant
+  rx_pin: GPIO3         # hardware dependant
+  baud_rate: 9600
+  debug:
+
+# Main settings
+climate:
+  - platform: midea
+    name: childroom_ac           # Use a unique name.
+#    transmitter_id:            # Optional. Add this option to use IR transmitter.
+    period: 1s                  # Optional
+    timeout: 2s                 # Optional
+    num_attempts: 3             # Optional
+    autoconf: true              # Autoconfigure most options.
+    beeper: true                # Beep on commands.
+    visual:                     # Optional. Example of visual settings override.
+      min_temperature: 17 °C    # min: 17
+      max_temperature: 30 °C    # max: 30
+      temperature_step: 1 °C  # min: 0.5
+    supported_modes:            # All capabilities in this section detected by autoconf.
+      - FAN_ONLY                # This capability is always used.
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+    custom_fan_modes:
+      - SILENT
+      - TURBO
+    supported_presets:          # All capabilities in this section detected by autoconf.
+      - ECO
+      - BOOST
+      - SLEEP                   # This capability is always used.
+    custom_presets:             # All capabilities in this section detected by autoconf.
+      - FREEZE_PROTECTION
+    supported_swing_modes:
+      - VERTICAL                # This capability is always used.
+      - HORIZONTAL
+      - BOTH

esphome/settings/old/ac_mainroom_old.yaml

@@ -0,0 +1,66 @@
+esphome:
+  name: mainroom_ac
+
+esp8266:
+  board: esp12e
+
+# Disable logging over UART (required)
+logger:
+  baud_rate: 0
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+web_server:
+  port: 80
+
+wifi:
+  ssid: !secret wifi_24_name
+  password: !secret wifi_24_pass
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Mainroom AC Fallback"
+    password: !secret esphome_captive_pass
+
+# UART settings for Midea dongle (required)
+uart:
+  tx_pin: GPIO1         # hardware dependant
+  rx_pin: GPIO3         # hardware dependant
+  baud_rate: 9600
+
+# Main settings
+climate:
+  - platform: midea
+    name: mainroom_ac           # Use a unique name.
+#    transmitter_id:            # Optional. Add this option to use IR transmitter.
+    period: 1s                  # Optional
+    timeout: 2s                 # Optional
+    num_attempts: 3             # Optional
+    autoconf: true              # Autoconfigure most options.
+    beeper: true                # Beep on commands.
+    visual:                     # Optional. Example of visual settings override.
+      min_temperature: 17 °C    # min: 17
+      max_temperature: 30 °C    # max: 30
+      temperature_step: 1 °C  # min: 0.5
+    supported_modes:            # All capabilities in this section detected by autoconf.
+      - FAN_ONLY                # This capability is always used.
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+    custom_fan_modes:
+      - SILENT
+      - TURBO
+    supported_presets:          # All capabilities in this section detected by autoconf.
+      - ECO
+      - BOOST
+      - SLEEP                   # This capability is always used.
+    custom_presets:             # All capabilities in this section detected by autoconf.
+      - FREEZE_PROTECTION
+    supported_swing_modes:
+      - VERTICAL                # This capability is always used.
+      - HORIZONTAL
+      - BOTH