hass.fnv/esphome/settings/presence_radar_bedroom.yaml

substitutions:
  # Set the device name
  name: presence_radar_bedroom
  # Set the friendly name
  friendly_name: Presence Radar Bedroom
  # Provide the wifi SSID
  wifi: !secret wifi_24_name
  #Provide the wifi password
  wifi_pass: !secret wifi_24_pass
  #Provide an OTA password:
  ota_pass: !secret api_encryption_key
  device_host: presence-radar-bedroom.lan

### No modifications needed below here ###
####################################################################################

esphome:
  name: $name
  friendly_name: $friendly_name
  platformio_options:
    board_build.flash_mode: dio
    board_build.f_cpu: 80000000L
  name_add_mac_suffix: false

wifi:
  ssid: $wifi
  password: $wifi_pass
  power_save_mode: LIGHT
  use_address: 192.168.1.109 #${device_host}
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:

captive_portal:

web_server:
  port: 80

esp32:
  board: lolin_c3_mini
  framework:
    type: esp-idf
  
# Enable Home Assistant API
api:
  encryption:
    key: $ota_pass

ota:
  - platform: esphome
    password: $ota_pass

logger:
  level: DEBUG

uart:
  tx_pin: GPIO4
  rx_pin: GPIO3
  baud_rate: 256000
  parity: NONE
  stop_bits: 1

ld2410:

binary_sensor:
  - platform: ld2410
    has_target:
      name: Presence
    has_moving_target:
      name: Moving Target
    has_still_target:
      name: Still Target
    out_pin_presence_status:
      name: Out Pin Presence Status

sensor:
  - platform: ld2410
    light:
      name: Light
    moving_distance:
      name : Moving Distance
    still_distance:
      name: Still Distance
    moving_energy:
      name: Move Energy
    still_energy:
      name: Still Energy
    detection_distance:
      name: Detection Distance
    g0:
      move_energy:
        name: g0 move energy
      still_energy:
        name: g0 still energy
    g1:
      move_energy:
        name: g1 move energy
      still_energy:
        name: g1 still energy
    g2:
      move_energy:
        name: g2 move energy
      still_energy:
        name: g2 still energy
    g3:
      move_energy:
        name: g3 move energy
      still_energy:
        name: g3 still energy
    g4:
      move_energy:
        name: g4 move energy
      still_energy:
        name: g4 still energy
    g5:
      move_energy:
        name: g5 move energy
      still_energy:
        name: g5 still energy
    g6:
      move_energy:
        name: g6 move energy
      still_energy:
        name: g6 still energy
    g7:
      move_energy:
        name: g7 move energy
      still_energy:
        name: g7 still energy
    g8:
      move_energy:
        name: g8 move energy
      still_energy:
        name: g8 still energy
  - platform: internal_temperature
    name: ESP Temperature
    unit_of_measurement: °C
    device_class: TEMPERATURE
    update_interval: 30s
    entity_category: "diagnostic"
  - platform: uptime
    name: Uptime
    id: sys_uptime
    update_interval: 10s
  - platform: wifi_signal 
    name: WiFi RSSI
    id: wifi_signal_db
    update_interval: 30s
    entity_category: "diagnostic"

switch:
  - platform: ld2410
    engineering_mode:
      name: "LD2410 Engineering Mode"
    bluetooth:
      name: "LD2410 Bluetooth"

number:
  - platform: ld2410
    timeout:
      name: Timeout
    light_threshold:
      name: Light Threshold
    max_move_distance_gate:
      name: Max Move Distance Gate
    max_still_distance_gate:
      name: Max Still Distance Gate
    g0:
      move_threshold:
        name: g0 move threshold
      still_threshold:
        name: g0 still threshold
    g1:
      move_threshold:
        name: g1 move threshold
      still_threshold:
        name: g1 still threshold
    g2:
      move_threshold:
        name: g2 move threshold
      still_threshold:
        name: g2 still threshold
    g3:
      move_threshold:
        name: g3 move threshold
      still_threshold:
        name: g3 still threshold
    g4:
      move_threshold:
        name: g4 move threshold
      still_threshold:
        name: g4 still threshold
    g5:
      move_threshold:
        name: g5 move threshold
      still_threshold:
        name: g5 still threshold
    g6:
      move_threshold:
        name: g6 move threshold
      still_threshold:
        name: g6 still threshold
    g7:
      move_threshold:
        name: g7 move threshold
      still_threshold:
        name: g7 still threshold
    g8:
      move_threshold:
        name: g8 move threshold
      still_threshold:
        name: g8 still threshold

button:
  - platform: ld2410
    factory_reset:
      name: "LD2410 Factory Reset"
    restart:
      name: "LD2410 Reboot"
    query_params:
      name: "LD2410 Query Params"
  - platform: restart
    icon: mdi:power-cycle
    name: "ESP Reboot"

text_sensor:
  - platform: ld2410
    version:
      name: "LD2410 Firmware Version"
    mac_address:
      name: "LD2410 MAC Address"

select:
  - platform: ld2410
    distance_resolution:
      name: "Distance Resolution"
    baud_rate:
      name: "Baud Rate"
    light_function:
      name: Light Function
    out_pin_level:
      name: Out Pin Level

light:
  - platform: status_led
    name: sys_status
    pin: 
      number: GPIO8
      inverted: True
    internal: True
    restore_mode: ALWAYS_OFF