diff --git a/appdaemon/settings/apps/climate/climate.old_py b/appdaemon/settings/apps/climate/climate.old_py
deleted file mode 100644
index 95192c5..0000000
--- a/appdaemon/settings/apps/climate/climate.old_py
+++ /dev/null
@@ -1,337 +0,0 @@
-import appdaemon.plugins.hass.hassapi as hass
-import struct
-import binascii
-# for PID
-import time
-
-class Climate(hass.Hass):
-  ir_topic = "home/remote/rm2/code/set"
-  target_temp = 24.0 #default
-  pid = PID(P = 0.2, I=0.0, D=0.0)
-
-  def initialize(self):
-    if "target_temp" not in self.args or "temp_sensor" not in self.args or "ha_panel" not in self.args or "door_window" not in self.args:
-      self.error("Please provide target_temp, temp_sensor, ha_panel, door_window in config!")
-      return
-    self.listen_state(self.target_temp_changed, self.args['target_temp'])
-    self.listen_state(self.temp_sensor_changed, self.args['temp_sensor'])
-    self.listen_state(self.constraint_changed, self.args['constraint'])
-    self.listen_state(self.ha_panel_changed, self.args['ha_panel'])
-    self.listen_state(self.door_window_changed, self.args['door_window'])
-    self.target_temp_changed("", "", "", "", "")
-
-  def door_window_changed(self, entity, attribute, old, new, kwargs):
-    self.do_action()
-
-  def ha_panel_changed(self, entity, attribute, old, new, kwargs):
-    self.do_action()
-
-  def constraint_changed(self, entity, attribute, old, new, kwargs):
-    self.do_action()
-
-  def target_temp_changed(self, entity, attribute, old, new, kwargs):
-    self.target_temp = float(self.get_state(self.args['target_temp']))
-    self.pid.SetPoint = self.target_temp
-    self.log('Target temp changed to: ' + str(self.target_temp))
-    self.do_action()
-
-  def temp_sensor_changed(self, entity, attribute, old, new, kwargs):
-    self.log('New room temp: ' + str(new))
-    self.do_action()
-
-  def split_off(self):
-    remote = Remote()
-    code = remote.set_mode("NONE", "NONE", self.target_temp, "OFF")
-    self.call_service("mqtt/publish", topic = self.ir_topic, payload = code.decode("utf-8"))
-
-  def do_action(self):
-    if 'constraint' in self.args and not self.constrain_input_boolean(self.args['constraint']):
-        self.log("Temperature control is disabled.")
-        self.split_off()
-        return
-
-    # Проверить alarm_panel
-    ha_panel_state = self.get_state(self.args['ha_panel'])
-    if (ha_panel_state != 'disarmed'):
-        self.log("Nobody home. Turning off split.")
-        self.split_off()
-        return
-    
-    # Проверить датчики дверей и окон
-    door_window_state = self.get_state(self.args['door_window'])
-    if (door_window_state != 'off'):
-        self.log("Balcony door is opened. Turning off split.")
-        self.split_off()
-        return
-
-    room_temp = float(self.get_state(self.args['temp_sensor']))
-    self.pid.update(room_temp)
-    output = self.pid.output
-    self.log("PID: " + str(output) + ".")
-
-    # Определяем режим
-    mode = "COOLING"
-    room_temp = float(self.get_state(self.args['temp_sensor']))
-    if (room_temp >= self.target_temp):
-        mode = "COOLING"
-    else:
-        mode = "HEATING"
-
-    temp_diff = abs(room_temp - self.target_temp)
-    if (output < 0):
-        self.log("Temperature differs on {} degree, turn on split for {}".format(temp_diff, mode))
-        remote = Remote()
-        code = remote.set_mode(mode, "2", int(self.target_temp), "ON")
-        self.call_service("mqtt/publish", topic = self.ir_topic, payload = code.decode("utf-8"))
-    else:
-        self.log("Temperature is ok, turn off split.")
-        self.split_off()
-
-#
-# App to control climate device (split system)
-#
-# Args:
-#
-# notify = notification platform to send notifications to
-#
-# None
-#
-# Release Notes
-#
-# Version 1.0:
-#   Initial Version
-
-# -------------------------------------------------------------------------------------------------
-"""
-Library that genrates LG air conditioner remote codes
-"""
-FIRST_BYTE = 136 # b10001000
-
-STATE = {
-    "ON": 0,
-    "OFF": 24, # b11000
-    "CHANGE_MODE": 1,
-}
-
-MODE = {
-    "HEATING": 4, # b100
-    "AUTO": 3, # b011
-    "DEHUIDIFICATION": 1, # b001
-    "COOLING": 0,
-    "NONE": 0,
-}
-
-TEMPERATURE_OFFSET = 15
-
-FAN = {
-    "1": 1,
-    "2": 0,
-    "3": 2,
-    "4": 4, # b100
-    "NONE": 5, # b101
-}
-
-FIRST_HIGH = 8271
-FIRST_LOW = 4298
-ZERO_AND_ONE_HIGH = 439
-ZERO_LOW = 647
-ONE_LOW = 1709
-
-BUFFER_SIZE = 59
-
-def test_bit(num, offset):
-    """
-    Test the num(int) if at the given offset bit is 1
-    """
-    mask = 1 << offset
-    return num & mask
-
-def set_bit(num, offset):
-    """
-    Set bit to at the given offset to 1
-    """
-    mask = 1 << offset
-    return num | mask
-
-class Remote(object):
-    """
-    Library that genrates LG air conditioner remote codes
-    """
-
-    def __init__(self):
-        self.codes = [0] * BUFFER_SIZE
-        self.crc = 0
-
-    def set_mode(self, mode, fan, temperature, state):
-        """
-        Generate code and put it in the buffer
-        """
-        self.codes[0] = FIRST_HIGH
-        self.codes[1] = FIRST_LOW
-        self.crc = 0
-
-        self.fill_buffer(0, 8, FIRST_BYTE)
-        self.fill_buffer(8, 5, STATE[state])
-
-        if state == 'OFF':
-            self.fill_buffer(13, 3, MODE['NONE'])
-        else:
-            self.fill_buffer(13, 3, MODE[mode])
-
-        if state == 'OFF':
-            self.fill_buffer(16, 4, 0)
-        else:
-            self.fill_buffer(16, 4, temperature - TEMPERATURE_OFFSET)
-
-        self.fill_buffer(20, 1, 0) # jet
-
-        if state == 'OFF':
-            self.fill_buffer(21, 3, FAN['NONE'])
-        else:
-            self.fill_buffer(21, 3, FAN[fan])
-
-        self.fill_buffer(24, 4, self.crc)
-        self.codes[BUFFER_SIZE - 1] = ZERO_AND_ONE_HIGH
-        self.codes = binascii.hexlify(self.lirc2broadlink(self.codes))
-        return self.codes
-
-    def lirc2broadlink(self, pulses):
-        array = bytearray()
-     
-        for pulse in pulses:
-            pulse = int(pulse * 269 / 8192)  # 32.84ms units
-
-            if pulse < 256:
-                array += bytearray(struct.pack('>B', pulse))  # big endian (1-byte)
-            else:
-                array += bytearray([0x00])  # indicate next number is 2-bytes
-                array += bytearray(struct.pack('>H', pulse))  # big endian (2-bytes)
-     
-        packet = bytearray([0x26, 0x00])  # 0x26 = IR, 0x00 = no repeats
-        packet += bytearray(struct.pack('<H', len(array)))  # little endian byte count
-        packet += array
-        packet += bytearray([0x0d, 0x05])  # IR terminator
-     
-        # Add 0s to make ultimate packet size a multiple of 16 for 128-bit AES encryption.
-        remainder = (len(packet) + 4) % 16  # rm.send_data() adds 4-byte header (02 00 00 00)
-        if remainder:
-            packet += bytearray(16 - remainder)
-     
-        return packet
-
-    def fill_buffer(self, pos, bits, value):
-        """
-        Fill buffer
-        """
-        i = bits
-        while i > 0:
-            index = 2 + 2 * (pos + bits-i)
-            self.codes[index] = ZERO_AND_ONE_HIGH
-
-            if test_bit(value, i - 1) != 0:
-                self.codes[index + 1] = ONE_LOW
-            else:
-                self.codes[index + 1] = ZERO_LOW
-
-            if test_bit(value, i - 1) != 0:
-                bitset = 0
-                bitset = set_bit(bitset, (128 + i - pos - bits - 1) % 4)
-                self.crc = self.crc + bitset
-
-            i -= 1
-
-
-# ------------------- PID CONTROLLER --------------------------------------------
-class PID:
-    """PID Controller
-    """
-
-    def __init__(self, P=0.2, I=0.0, D=0.0):
-
-        self.Kp = P
-        self.Ki = I
-        self.Kd = D
-
-        self.sample_time = 0.00
-        self.current_time = time.time()
-        self.last_time = self.current_time
-
-        self.clear()
-
-    def clear(self):
-        """Clears PID computations and coefficients"""
-        self.SetPoint = 0.0
-
-        self.PTerm = 0.0
-        self.ITerm = 0.0
-        self.DTerm = 0.0
-        self.last_error = 0.0
-
-        # Windup Guard
-        self.int_error = 0.0
-        self.windup_guard = 20.0
-
-        self.output = 0.0
-
-    def update(self, feedback_value):
-        """Calculates PID value for given reference feedback
-        .. math::
-            u(t) = K_p e(t) + K_i \int_{0}^{t} e(t)dt + K_d {de}/{dt}
-        .. figure:: images/pid_1.png
-           :align:   center
-           Test PID with Kp=1.2, Ki=1, Kd=0.001 (test_pid.py)
-        """
-        error = self.SetPoint - feedback_value
-
-        self.current_time = time.time()
-        delta_time = self.current_time - self.last_time
-        delta_error = error - self.last_error
-
-        if (delta_time >= self.sample_time):
-            self.PTerm = self.Kp * error
-            self.ITerm += error * delta_time
-
-            if (self.ITerm < -self.windup_guard):
-                self.ITerm = -self.windup_guard
-            elif (self.ITerm > self.windup_guard):
-                self.ITerm = self.windup_guard
-
-            self.DTerm = 0.0
-            if delta_time > 0:
-                self.DTerm = delta_error / delta_time
-
-            # Remember last time and last error for next calculation
-            self.last_time = self.current_time
-            self.last_error = error
-
-            self.output = self.PTerm + (self.Ki * self.ITerm) + (self.Kd * self.DTerm)
-
-    def setKp(self, proportional_gain):
-        """Determines how aggressively the PID reacts to the current error with setting Proportional Gain"""
-        self.Kp = proportional_gain
-
-    def setKi(self, integral_gain):
-        """Determines how aggressively the PID reacts to the current error with setting Integral Gain"""
-        self.Ki = integral_gain
-
-    def setKd(self, derivative_gain):
-        """Determines how aggressively the PID reacts to the current error with setting Derivative Gain"""
-        self.Kd = derivative_gain
-
-    def setWindup(self, windup):
-        """Integral windup, also known as integrator windup or reset windup,
-        refers to the situation in a PID feedback controller where
-        a large change in setpoint occurs (say a positive change)
-        and the integral terms accumulates a significant error
-        during the rise (windup), thus overshooting and continuing
-        to increase as this accumulated error is unwound
-        (offset by errors in the other direction).
-        The specific problem is the excess overshooting.
-        """
-        self.windup_guard = windup
-
-    def setSampleTime(self, sample_time):
-        """PID that should be updated at a regular interval.
-        Based on a pre-determined sampe time, the PID decides if it should compute or return immediately.
-        """
-        self.sample_time = sample_time
diff --git a/appdaemon/settings/apps/climate/climate.py b/appdaemon/settings/apps/climate/climate.py
index 3013666..688788f 100644
--- a/appdaemon/settings/apps/climate/climate.py
+++ b/appdaemon/settings/apps/climate/climate.py
@@ -273,4 +273,4 @@ class Remote(object):
                 bitset = set_bit(bitset, (128 + i - pos - bits - 1) % 4)
                 self.crc = self.crc + bitset
 
-            i -= 1
+            i -= 1
\ No newline at end of file
diff --git a/appdaemon/settings/apps/sensors/toilet_presence.py b/appdaemon/settings/apps/sensors/toilet_presence.py
new file mode 100644
index 0000000..80fdea3
--- /dev/null
+++ b/appdaemon/settings/apps/sensors/toilet_presence.py
@@ -0,0 +1,47 @@
+import appdaemon.plugins.hass.hassapi as hass
+
+#
+# Water leak detector
+# close water valve and send a report
+#
+# Args:
+#
+# sensor = water leak sensor group
+# valve = water valve - app will close it, when leak is detected
+# notify = notify name to send notification
+#
+# None
+#
+# Release Notes
+#
+# Version 1.0:
+#   Initial Version
+
+class ToiletPresence(hass.Hass):
+  state = ""
+
+  def initialize(self):
+    if 'sensor' not in self.args:
+      self.error("Please provide sensor in config!")
+      return
+    self.listen_state(self.distance_changed, self.args['sensor'])
+    
+  def distance_changed(self, entity, attribute, old, new, kwargs):
+    distance = int(new)
+
+    if distance > 1000 or distance < 850:
+      if self.state == "" or self.state == "off":
+        self.set_value("on")
+    elif distance < 1000 and distance > 850:
+      if self.state == "" or self.state == "on":
+        self.set_value("off")
+
+  def set_value(self, state):
+    self.log('Toilet presense: {}'.format(state))
+    self.state = state
+    entity_id = "sensor.toilet_presence"
+
+    attributes = {}
+    attributes['description'] = 'Created and updated from appdaemon ({})'.format(__name__)
+
+    self.set_state(entity_id, state = state, attributes = attributes)
\ No newline at end of file
diff --git a/appdaemon/settings/apps/sensors/toilet_presence.yaml b/appdaemon/settings/apps/sensors/toilet_presence.yaml
new file mode 100644
index 0000000..9627f82
--- /dev/null
+++ b/appdaemon/settings/apps/sensors/toilet_presence.yaml
@@ -0,0 +1,13 @@
+#################################
+#         WATER LEAK            #
+#################################
+toilet_presence:
+  module: toilet_presence
+  class: ToiletPresence
+  # constraint: input_boolean.water_leak_control
+  sensor: sensor.toilet_distance
+  # valve: switch.water_valve
+  # notify: telegram
+  # gw_mac: !secret aqara1_mac
+  global_dependencies:
+    - globals
\ No newline at end of file
diff --git a/appdaemon/settings/apps/timers/airfresher.py b/appdaemon/settings/apps/timers/airfresher.py
index 488b0a0..5955c6c 100644
--- a/appdaemon/settings/apps/timers/airfresher.py
+++ b/appdaemon/settings/apps/timers/airfresher.py
@@ -17,7 +17,8 @@ import datetime
 class AirFresher(hass.Hass):
   timers = []
   fresh_times = 0
-  fresh_every_mins = 15
+  fresh_times_max = 5
+  fresh_every_mins = 1
   last_fresh_date = None
 
   def initialize(self):
@@ -41,8 +42,8 @@ class AirFresher(hass.Hass):
       self.log('Start freshing timer.')
       self.last_fresh_date = self.datetime()
       self.fresh_times = 0
-      newtime = self.datetime()+datetime.timedelta(seconds=5)
-      self.timers.append(self.run_every(self.timer_tick, newtime, 4*60))
+      newtime = self.datetime()+datetime.timedelta(seconds=15)
+      self.timers.append(self.run_every(self.timer_tick, newtime, self.fresh_every_mins*60))
 
   def cancel_timers(self) -> None:
     for timer in self.timers:
@@ -50,15 +51,19 @@ class AirFresher(hass.Hass):
     timers = []
 
   def timer_tick(self, args) -> None:
-    self.fresh()
+    toilet_presence = self.get_state("sensor.toilet_presence")
+    self.log('Timer ticked, presence is: {}'.format(toilet_presence))
+    if (toilet_presence == "on"):
+      self.fresh()
 
   def fresh(self):
     self.log("current timer: {}".format(self.last_fresh_date))
 
     self.fresh_times = self.fresh_times + 1
-    if (self.fresh_times > 5):
+    if (self.fresh_times > self.fresh_times_max):
       self.log('Fresh max times is reached. Canceling timer.')
       self.cancel_timers()
       return
+
     self.log('freshing in {}'.format(self.fresh_times))
     self.call_service("mqtt/publish", topic = "home/airfresher/airfresher/fresh/set", payload = "1")
diff --git a/hass/settings/configuration.yaml b/hass/settings/configuration.yaml
index 48f434a..00d735a 100644
--- a/hass/settings/configuration.yaml
+++ b/hass/settings/configuration.yaml
@@ -64,14 +64,15 @@ homekit: !include configuration/homekit/homekit.yaml
 #power meter
 modbus: !include configuration/modbus.yaml
 
-mysensors: !include configuration/mysensors.yaml
+#mysensors: !include configuration/mysensors.yaml
 
 utility_meter: !include_dir_merge_named configuration/utility_meter
 
 speedtestdotnet: !include configuration/speedtest.yaml
+yandex_smart_home: !include configuration/alice.yaml
 
 # fan:
 #   - platform: xiaomi_miio
 #     host: 192.168.1.14
 #     token: '411cf70bb69052c0121813388f30e193'
-#     model: zhimi.airpurifier.mc1
\ No newline at end of file
+#     model: zhimi.airpurifier.mc1
diff --git a/hass/settings/configuration/alice.yaml b/hass/settings/configuration/alice.yaml
new file mode 100644
index 0000000..dfa8d97
--- /dev/null
+++ b/hass/settings/configuration/alice.yaml
@@ -0,0 +1,18 @@
+filter:
+  include_domains:
+    - alarm_control_panel
+    - switch
+    - light
+    - vacuum
+    - cover
+  exclude_entities:
+    - switch.plug_158d00020f3a29
+    - switch.plug_158d00026ea017
+    - switch.xiaomi_miio_switch
+#    include_entities:
+#      - media_player.tv
+#  entity_config:
+#    switch.kitchen:
+#      name: CUSTOM_NAME_FOR_YANDEX_SMART_HOME
+#    light.living_room:
+#      room: LIVING_ROOM
diff --git a/hass/settings/configuration/mysensors.yaml b/hass/settings/configuration/mysensors.yaml
index 2918038..a653bbd 100644
--- a/hass/settings/configuration/mysensors.yaml
+++ b/hass/settings/configuration/mysensors.yaml
@@ -1,4 +1,4 @@
-gateways:
-  - device: !secret mysensors_gateway_ip
-    tcp_port: 5003
-version: '2.0'
\ No newline at end of file
+#gateways:
+#  - device: !secret mysensors_gateway_ip
+#    tcp_port: 5003
+#version: '2.0'
\ No newline at end of file
diff --git a/hass/settings/configuration/script/airfresher_reset.yaml b/hass/settings/configuration/script/airfresher_reset.yaml
new file mode 100644
index 0000000..43e084b
--- /dev/null
+++ b/hass/settings/configuration/script/airfresher_reset.yaml
@@ -0,0 +1,6 @@
+airfresher_reset:
+  sequence:
+  - service: mqtt.publish
+    data:
+      topic: 'home/airfresher/airfresher/remain/set'
+      payload: 1500
\ No newline at end of file
diff --git a/hass/settings/configuration/sensor/airfresher.yaml b/hass/settings/configuration/sensor/airfresher.yaml
index 3ac6ec8..c040e63 100644
--- a/hass/settings/configuration/sensor/airfresher.yaml
+++ b/hass/settings/configuration/sensor/airfresher.yaml
@@ -10,4 +10,4 @@
 - platform: template
   sensors:
     airfresher_remain_percent:
-      value_template: "{{ ((100 / 1400) * (states('sensor.airfresher_remain') | int )) | round(2) }}"
\ No newline at end of file
+      value_template: "{{ ((100 / 1400) * (states('sensor.airfresher_remain') | int )) | round(2) }}"
diff --git a/hass/settings/configuration/sensor/toilet.yaml b/hass/settings/configuration/sensor/toilet.yaml
new file mode 100644
index 0000000..a2c1c94
--- /dev/null
+++ b/hass/settings/configuration/sensor/toilet.yaml
@@ -0,0 +1,4 @@
+- platform: mqtt
+  state_topic: 'home/bath/bath/distance'
+  name: 'toilet_distance'
+  unit_of_measurement: 'cm'
\ No newline at end of file
diff --git a/hass/settings/custom_components/yandex_smart_home b/hass/settings/custom_components/yandex_smart_home
new file mode 160000
index 0000000..a323a79
--- /dev/null
+++ b/hass/settings/custom_components/yandex_smart_home
@@ -0,0 +1 @@
+Subproject commit a323a790d1dc648b3991ba5600e9e8b2064c6d51
diff --git a/hass/settings/ui-lovelace.yaml b/hass/settings/ui-lovelace.yaml
index 2f8151f..5f552bc 100644
--- a/hass/settings/ui-lovelace.yaml
+++ b/hass/settings/ui-lovelace.yaml
@@ -52,6 +52,7 @@ views:
           - light.bath
           - light.philips_led
           - sensor.airfresher_remain
+          - sensor.toilet_presence
       - type: entities
         title: "Прихожая"
         show_header_toggle: false