updating configuration

esphome/settings/airfresher.yaml

@@ -1,8 +1,16 @@
+# ----------- User configutaion ------------------
+substitutions:
+  devicename: airfresher
+  upper_devicename: Airfresher
+  fresh_motor_pin: D1
+  remain_init: '2000'
+# ----------- /User configutaion ------------------
+
 # Need to turn off logging because senseair uses uart and have conflicts with logging
 logger:
 
 esphome:
-  name: airfresher
+  name: $devicename
   platform: ESP8266
   board: d1_mini
 
@@ -12,11 +20,12 @@ wifi:
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
-    ssid: "Airfresher Fallback Hotspot"
+    ssid: "$upper_devicename Fallback Hotspot"
     password: !secret esphome_captive_pass
 
 captive_portal:
 
+
 # Enable Home Assistant API
 api:
   password: !secret esphome_pass
@@ -29,14 +38,14 @@ globals:
  - id: remain
    type: int
    restore_value: yes
-   initial_value: '2000'
+   initial_value: $remain_init
 
 sensor:
   - platform: uptime
-    name: Airfresher Uptime
+    name: "$upper_devicename Uptime"
 
   - platform: template
-    name: "Airfresher Remain"
+    name: "$upper_devicename Remain"
     icon: "mdi:battery-80"
     lambda: |-
       return id(remain);
@@ -44,11 +53,11 @@ sensor:
 
 switch:
   - platform: gpio
-    pin: D1
+    pin: $fresh_motor_pin
     id: fresh_motor
   
   - platform: template
-    name: "Airfresher fresh"
+    name: "$upper_devicename fresh"
     icon: "mdi:air-humidifier"
     turn_on_action:
       - lambda: 'id(remain) -= 1;'
@@ -57,7 +66,7 @@ switch:
       - switch.turn_off: fresh_motor
 
   - platform: template
-    name: "Airfresher reset"
+    name: "$upper_devicename reset"
     icon: "mdi:backup-restore"
     turn_on_action:
       - lambda: 'id(remain) = 2000;'

esphome/settings/domofon.yaml

@@ -1,14 +1,14 @@
-############# User configuration #############
+# ----------- User configutaion ------------------
 substitutions:
+  devicename: domofon
+  upper_devicename: Domofon
   call_sensor_pin: "14"
   trubka_pin: "13"
   door_pin: "12"
-
-  board_name: domofon
-########### End user configuration ###########
+# ----------- /User configutaion ------------------
 
 esphome:
-  name: $board_name
+  name: $devicename
   platform: ESP8266
   board: d1_mini
 
@@ -18,7 +18,7 @@ wifi:
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
-    ssid: "Domofon Fallback Hotspot"
+    ssid: "$upper_devicename Fallback Hotspot"
     password: !secret esphome_captive_pass
 
 captive_portal:
@@ -38,7 +38,7 @@ binary_sensor:
       number: $call_sensor_pin
       mode: INPUT_PULLUP
       inverted: true
-    name: "Domofon incoming call"
+    name: "$upper_devicename incoming call"
     id: incoming_call
     device_class: lock
     filters:
@@ -49,7 +49,7 @@ binary_sensor:
 
 sensor:
   - platform: uptime
-    name: Domofon Uptime
+    name: "$upper_devicename Uptime"
 
 switch:
   - platform: gpio
@@ -66,7 +66,7 @@ switch:
 
   # Automatically open door switch
   - platform: template
-    name: "Domofon automatically open"
+    name: "$upper_devicename automatically open"
     id: auto_open
     icon: "mdi:door-open"
     optimistic: true
@@ -76,7 +76,7 @@ switch:
 
   # Automatically open door once switch
   - platform: template
-    name: "Domofon automatically open once"
+    name: "$upper_devicename automatically open once"
     id: auto_open_once
     icon: "mdi:door-open"
     optimistic: true
@@ -85,7 +85,7 @@ switch:
       - switch.turn_off: auto_open
 
   - platform: template
-    name: "Domofon force open"
+    name: "$upper_devicename force open"
     id: open_force
     icon: "mdi:door-open"
     turn_on_action:

esphome/settings/watercontrol.yaml

@@ -1,8 +1,22 @@
+# ----------- User configutaion ------------------
+substitutions:
+  devicename: domofon
+  upper_devicename: Domofon
+  pin_cold: D1
+  init_cold: '210.29'
+  pin_hot: D2
+  init_hot: '109.74'
+  water_open_pin: D5
+  water_close_pin: D3
+  ultrasonic_echo_pin: D6
+  ultrasonic_trig_pin: D7
+# ----------- /User configutaion ------------------
+
 # Need to turn off logging because senseair uses uart and have conflicts with logging
 logger:
 
 esphome:
-  name: watercontrol
+  name: $devicename
   platform: ESP8266
   board: d1_mini
 
@@ -12,7 +26,7 @@ wifi:
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
-    ssid: "Watercontrol Fallback Hotspot"
+    ssid: "$upper_devicename Fallback Hotspot"
     password: !secret esphome_captive_pass
 
 captive_portal:
@@ -24,7 +38,6 @@ api:
 ota:
   password: !secret esphome_pass
 
-
 globals:
  - id: water_state
    type: bool
@@ -33,17 +46,17 @@ globals:
  - id: counter_cold_value
    type: float
    restore_value: yes
-   initial_value: '210.29'
+   initial_value: $init_cold
  - id: counter_hot_value
    type: float
    restore_value: yes
-   initial_value: '109.74'
+   initial_value: $init_hot
 
 binary_sensor:
   - platform: gpio
     name: pulse_cold
     pin: 
-      number: D1
+      number: $pin_cold
       mode: INPUT_PULLUP
     filters:
       - delayed_off: 100ms
@@ -54,7 +67,7 @@ binary_sensor:
   - platform: gpio
     name: pulse_hot
     pin: 
-      number: D2
+      number: $pin_hot
       mode: INPUT_PULLUP
     filters:
       - delayed_off: 100ms
@@ -64,7 +77,7 @@ binary_sensor:
 
 sensor:
   - platform: uptime
-    name: "Watercontrol Uptime"
+    name: "$upper_devicename Uptime"
   
   - platform: template
     name: "counter_hot"
@@ -79,22 +92,22 @@ sensor:
     update_interval: 60s
 
   - platform: ultrasonic
-    trigger_pin: D7
-    echo_pin: D6
+    trigger_pin: $ultrasonic_trig_pin
+    echo_pin: $ultrasonic_echo_pin
     name: "Toilet Distance"
     update_interval: 5s
 
 switch:
   - platform: gpio
     pin: 
-      number: D5
+      number: $water_open_pin
       inverted: yes
     id: water_open
     interlock: [water_close]
 
   - platform: gpio
     pin: 
-      number: D3
+      number: $water_close_pin
       inverted: yes
     id: water_close
     interlock: [water_open]